Divisi Kabel Power Dan Telco

Kabel Voksel NYRGBY (Cu/PVC/AWA/PVC) Info Harga dan Diskon / komisi,WA : Simpati12 812 1843 3055NYRGBY (Cu/PVC/AWA/PVC) 1 x 50 mm2 Str 0.6/1(1.2) KvNYRGBY (Cu/PVC/AWA/PVC) 1 x 70 mm2 _ Str 0.6/1 KvNYRGBY (Cu/PVC/AWA/PVC) 1 x 95 mm2 - Str 0.6/1 KvNYRGBY (Cu/PVC/AWA/PVC) 1 x 120 mm2 - Str - 0.6/1 KvNYRGBY (Cu/PVC/AWA/PVC) 1 x 150 mm2 -  0.6/1 KvNYRGBY (Cu/PVC/AWA/PVC) 1 x 185 mm2 - Str - 0.6/1 KvNYRGBY (Cu/PVC/AWA/PVC) 1 x 240 mm2 - Str 0.6/1 KvKabel Elektrik yang di tanam dalam tanah memiliki type bermacam-macam, salah satunya yang akan kita bahas kabel tanah low voltage adalah type kabel NYFGBY dan NYRGBY.Kabel type NYFGBY dan NYRGBY sering kita jumpai di pasang dan diaplikasikan untuk tegangan menengah seperti untuk suplai penerangan lampu jalan, suplai lampu merah, dan juga sebagai penghubung antara panel satu dengan lainnya, dimana kabel tersebut ditanam dalam tanah.Dan mari kita kupas sebenarnya apa sih yang ada dalam kabel tersebut.Konduktor : sebagai penghantar arus listrik.Isolasi : sebagai penyekat antara konduktor satu dengan lainnya, agar tak terjadi break down/ konsleting.Innersheath : isolasi layer dalam berfungsi mengikat agar pilinan cabling tetap  pada diameter tertentu.Armouring : adalah penyekat atau pelindung mekanis agar konduktor terjaga dari bahaya luar agar tidak terjadi break down/ konsleting. NYFGBY berpelindung galvanized steel flat, sedangkan NYRGBY berpelindung galvanized round wire.Outersheath : adalah isolasi layer luar berfungsi sebagai pelindung mekanis juga sebagai pengikat kabel agar pada posisi di diameter tertentu.Kabel Listrik

Kabel Voksel HAL 800 mm2 HAL (Hard-drawn Aluminium Stranded Conductor)Informasi harga, Diskon, Komisi by WA : simpati12 8121843 3055 (Fast Response)Types: HAL 800 mm2BARE ALUMINIUM CONDUCTORFeatureThe conductors are applied for overhead power transmission purposes, medium tension overhead systems and distribution networks.CONSTRUCTIONConductorSeven of more aluminium wires of the same nominal diameter are twisted together in concentric layers. When conductor consists of more than one layer, successive layers are twisted in opposite directions which is defined as right-hand lay (Z) or left-hand lay (S).All Aluminium Conductor (AAC)The conductor shall be constructed of hard drawn aluminium wires with 99,45% minimum purity of aluminium. The maximum resistivity at 20o C is 0.028264 ohm.mm²/m.All Aluminium Alloy Conductor (AAAC)The conductor shall be constructed of hard drawn aluminium alloy wires which consists of: minimum 97,28% Aluminium             ± 0,5 % Magnesium             ± 0 5 % Silicon The maximum resistivity at 20° C is 0.0328 ohm.mm²/mAluminium Conductor Steel Reinforced (ACSR)The conductor shall be constructed of All Aluminium Conductor (AAC) and one or stranded seven Galvanized Steel Wires as a core, together built up in concentric layers.The galvanized steel wires which is used as a core shall be heat treatment and Zinc coated uniformly by using the method of hot dipped or electrolyte zinc coated.Aluminium-Clad Steel Core Thermal Resistant Aluminium Alloy (TACSR/AS)The conductor shall be constructed of Thermal Resistant Aluminium Alloy wires (TAL wires) and stranded seven Aluminium-clad Steel wires (AS wires) as a core, together built up in concentric layers. The tensile strength of TAL wire after heating 230° C for one hour shall be more 90% than the value before heating. And the conductivity is more of 60% IACS (International Annealed Copper Standard). The conductivity of AS wire is 20.3% - 23.0% IACS.Type :AAC (All Aluminium Conductor)HAL (Hard-drawn Aluminium Stranded Conductor)AAAC (All Aluminium Alloy Conductor)ACSR (Aluminium Conductor Steel Reinforced)TACSR/AS (Aluminium-clad Steel Core Thermal Resistant Aluminium Alloy)Specification : SPLN 41- 6:1981 for AACJIS C 3109-1994 for HALSPLN 41- 8:1981 for AAACSPLN 41- 7:1981 for ACSRJFEPC A 242:1977 for TACSR/AS(Other specifications are available upon request) BARE ALUMINUM CONDUCTOR

Kabel Voksel AAACInformasi harga, Diskon, Komisi by WA : tlkmsl12 8121843 3055 (Fast Response)Types:AAC 1000 mm2 (91 x 3.75 mm)AAAC 35 mm2 AAAC 50 mm2 AAAC 70 mm2 AAAC 95 mm2 AAAC 150 mm2  ( 37  Wire ) AAAC 240 mm2  ( 61 Wire )AAAC 400 mm2  (61x3 00mm)AAAC 630 mm2AAAC 800 mm2 AAAC 1000 mm2  OVERHEAD XLPE COVEREDMEDIUM VOLTAGE OVERHEAD XLPE COVERED CONDUCTOR : AAAC-S - 6/10 KV(ALL ALUMINIUM ALLOY CONDUCTOR AND XLPE INSULATED)Specification : SPLN 41-10:1991FeatureThese medium voltage cables are applied for overhead transmission line.CONSTRUCTIONConductorRound stranded all aluminium alloy conductor (AAAC).InsulationExtruded Black Crosslink Polyethylene (XLPE), suitable for the operating temperature of the cable.SpecificationSPLN 41-10:1991(other specification are available upon request)kabel AAAC

Kabel Voksel NYMInfo Harga WA : Simpati12 812 1843 3055NYM (Cu/PVC/PVC) 2 x 1.5 mm2 - Solid - 300/500 V NYM (Cu/PVC/PVC) 2 x 2.5 mm2 - Solid - 300/500 V NYM (Cu/PVC/PVC) 2 x 4 mm2 - Solid - 300/500 V NYM (Cu/PVC/PVC) 3 x 1.5 mm2 - Solid - 300/500 V NYM (Cu/PVC/PVC) 3 x 2.5 mm2 - Solid - 300/500 V NYM (Cu/PVC/PVC) 3 x 4 mm2 - Solid - 300/500 V NYM (Cu/PVC/PVC) 4 x 1.5 mm2 - Solid - 300/500 V NYM (Cu/PVC/PVC) 4 x 2.5 mm2 - Solid - 300/500 V NYM (Cu/PVC/PVC) 4 x 4 mm2 - Solid - 300/500 V  KABEL N.Y.M Diaplikasikan untuk kabel instalasi listrik rumah atau gedung dan sistem tenaga. Kabel NYM berinti lebih dari 1, memiliki lapisan isolasi PVC (biasanya warna putih atau abu-abu), ada yang berinti 2, 3 atau 4. Kabel NYM memiliki lapisan isolasi dua lapis, sehingga tingkat keamanannya lebih baik dari kabel NYA (harganya lebih mahal dari NYA). Kabel ini dapat dipergunakan dilingkungan yang kering dan basah, namun tidak boleh ditanam.

ACSR CONDUCTOR - BARE ALUMINIUM CONDUCTORSebagai distributor Kabel Voksel kami siap support bisnis anda dengan harga kompetitif. FeatureThe conductors aplicable for overhead power transmission purposes, medium tension overhead systems and distribution networks.CONSTRUCTIONConductorSeven of more aluminium wires of the same nominal diameter are twisted together in concentric layers. When conductor consists of more than one layer, successive layers are twisted in opposite directions which is defined as right-hand lay (Z) or left-hand lay (S).All Aluminium Conductor (AAC)The conductor shall be constructed of hard drawn aluminium wires with 99,45% minimum purity of aluminium. The maximum resistivity at 20o C is 0.028264 ohm.mm²/m.All Aluminium Alloy Conductor (AAAC)The conductor shall be constructed of hard drawn aluminium alloy wires which consists of: minimum 97,28% Aluminium             ± 0,5 % Magnesium             ± 0 5 % Silicon The maximum resistivity at 20° C is 0.0328 ohm.mm²/mAluminium Conductor Steel Reinforced (ACSR)The conductor shall be constructed of All Aluminium Conductor (AAC) and one or stranded seven Galvanized Steel Wires as a core, together built up in concentric layers.The galvanized steel wires which is used as a core shall be heat treatment and Zinc coated uniformly by using the method of hot dipped or electrolyte zinc coated.Aluminium-Clad Steel Core Thermal Resistant Aluminium Alloy (TACSR/AS)The conductor shall be constructed of Thermal Resistant Aluminium Alloy wires (TAL wires) and stranded seven Aluminium-clad Steel wires (AS wires) as a core, together built up in concentric layers. The tensile strength of TAL wire after heating 230° C for one hour shall be more 90% than the value before heating. And the conductivity is more of 60% IACS (International Annealed Copper Standard). The conductivity of AS wire is 20.3% - 23.0% IACS.Type :AAC (All Aluminium Conductor)HAL (Hard-drawn Aluminium Stranded Conductor)AAAC (All Aluminium Alloy Conductor)ACSR (Aluminium Conductor Steel Reinforced)TACSR/AS (Aluminium-clad Steel Core Thermal Resistant Aluminium Alloy)Specification : SPLN 41- 6:1981 for AACJIS C 3109-1994 for HALSPLN 41- 8:1981 for AAACSPLN 41- 7:1981 for ACSRJFEPC A 242:1977 for TACSR/AS(Other specifications are available upon request) LOW VOLTAGE MULTIPLEX CABLE - 0.6/ KVLOW VOLTAGE MULTIPLEX CABLE - 0.6/1 KV(ALUMINIUM CONDUCTOR, XLPE INSULATED)FeatureThese low voltage cables are applied for connection between the power line and service entrance cable on the customer.CONSTRUCTIONConductorPhase : all aluminium conductor.Neutral or messenger can be use one of these below:- All Aluminium Conductor (AAC).- All Aluminium Alloy Conductor (AAAC).- Aluminium Conductor Steel Reinforced (ACSR).InsulationExtruded Black Crosslink Polyethylene (XLPE), suitable for the operating temperature of the cable.Duplex : consist of one core insulation and one bare messenger conductor.Triplex : consist of two cores insulation and one bare messenger conductor.Quadruplex : consist of three cores insulation and one bare messenger conductor.Specification : SNI 04 - 0851:1989(Other specifications are available upon request)Type :Duplex secondary and service drop cable.Triplex secondary and service drop cable.Quadruplex secondary and service drop cable.

Sebagai distributor Kabel Voksel kami siap support projects anda dengan harga kompetitif. Kabel tegangan rendah yang ready:Control CableLow Voltage Budle Conductor for Overhead LineLow Voltage multiplex cable - 0.6/KVLow Voltage UndergroundMedium Heavy Thermoplastic Flexible CableNon-Metallic Sheated Outdoor CableSingle Cores Thermoplastic IndoorThermoplastic Indoor Cable Kabel NYFGBY

Kabel Voksel N2XSEYFGbY Informasi harga, Diskon, Komisi by WA : simpati12 812 1843 3055 (Fast Response)Types:N2XSEYFGbY 3 x 50 mm2 - 12/20 (24)N2XSEYFGbY 3 x 95 mm2 - 12/20 KvN2FSEYFGbY 3 x 300  mm2 - 12/20 (24) KvN2XSEFGBY 3 x 35 mm2 - 12/20 KvN2XSEFGBY  3 x 50 mm2 - 12/20 KvN2XSEYFGBY.  3 x 70 mm2 - 12/20 (24) Kv 3 CORES CABLE N2XSEYFGBY, NA2XSEYFGBYTHREE CORES CABLECOPPER OR ALUMINIUM CONDUCTOR,XLPE INSULATED,COPPER WIRES SCREENED,FLAT STEEL WIRES CONDUCTOR AND PVC SHEATHEDType N2XSEYFGbY, NA2XSEYFGbYFeatureXLPE insulated three cores cables are applied for installation indoors, outdoors, underground and cable rack.CONSTRUCTIONConductorStranded compacted circular copper or aluminium conductors. All internal interstices of trie conductor rilled with water blocking compound which is specified to prevent ingress of water through conductor during storage, handling, installation and operating of the cable.Conductor ScreenExtruded Semi-conducting compound. Minimum thickness 0.5 mm and the maximum volume resistivity of 5000 ohm-cn at 20° C and 25000 ohm-cm at 90° C.InsulationExtruded XLPE with high degree of cross-linking, free from contaminants, air voids and heat resistant by dry cured process.The nominal thickness as shown in table 1.Type:N2XSEYFGbYNA2XSEYFGbYNominal Voltage:3.6/6 ( 7.2 ) kV6/10 ( 12 ) kV8.7/15 ( 17.5 ) kV12/20 ( 24 ) kV18/30 (36) kVSpecification:SPLN 43-5(Other Specifications are availible upon request)Table 1. Insulation ThicknessTabel 2 . Minimum Total Cross Section Of Metallic ScreenInsulation ScreenExtruded Semi-conducting compound. Minimum thickness 0.5 mm and the maximum volume resistivity of 5000 ohm-cm at 20°C and 25000 ohm-cm at WC The screen is tightly fitted to insulation to exdude all air voids and can be easily hand stripped on site.Conduction Water Blocking LayerSemi-conductive water blocking tape provided over the insulation screen which will swell up under the influence ofmoisture or water.Metallic ScreenCopper wires applied over the conducting water blocking layer. Minimum cross section of concentric conductor as shown in table 2. Copper tape with minimum thickness 0.1 mm and maximum 0.3mm applied over copper wires.Water Blocking LayerNon-conducting water blocking tape provided the metallic screen which will swellup under ihe influence of moisture or water.Inner SheathExtruded black PVC, capable for operating continuously maximum temperature of the cable. Thickness of inner sheath as shown in table 3.Tabel 3. Inner Sheath ThicknessArmouringGalvanized flat steel wires with thickness 8.0 mm wrap helically over the surface of inner sheath minimum 90%. And galvanized Steel tape with nominal thickness 0.3 mm wrap helically minimum 50% cover the surface of the flat wires.Outer SheathExtruded red PVC, suitable tar exposure to sun-light or other local atmospheric environments and for the operating temperature of the cable.

Cable Voksel N2XSYInformasi harga, Diskon, Komisi by WA : simpati12 812 1843 3055 (Fast Response)Types:N2XSY. 1 x 35 mm2 - 12/20 (24) KvN2XSY. 1 x 50 mm2 - 12/20 (24) KvN2XSY. 1 x 70 mm2 - 12/20 (24) KvN2XSY. 1 x 95  mm2 - 12/20 (24) KvN2XSY. 1 x 120  mm2 - 12/20 (24) KvN2XSY. 1 x 150  mm2 - 12/20 KvN2XSY. 1 x 185  mm2 - 12/20 KvN2XSY. 1 x 240  mm2 - 12/20 (24) KvN2XSY 1 x 300 mm2 -12/20  KvN2XSY 1 x 400 mm2 -12/20 (24) KvN2XSY (Cu/XLPE/CWS/PVC) 1 x 500mm2 -12/20 (24) KvN2XSY 1 x 630 mm2 -12/20 (24) Kv 1 CORE CABLE TYPE N2XSY, NA2XSYSINGLE CORE CABLECOPPER OR ALUMINIUM CONDUCTOR,XLPE INSULATED,COPPER WIRES SCREENED AND PVC SHEATHEDType N2XSY, NA2XSYFeatureXLPE insulated single core cables are applied for installation indoors, outdoors, underground and cable rack.CONSTRUCTIONConductorStranded compacted circular copper or aluminium conductors. All internal interstices of trie conductor rilled with water blocking compound which is specified to prevent ingress of water through conductor during storage, handling, installation and operating of the cable.Conductor ScreenExtruded Semi-conducting compound. Minimum thickness 0.5 mm and the maximum volume resistivity of 5000 ohm-an at 20° C and 25000 ohm-cm at 90° C.InsulationExtruded XLPE with high degree of cross-linking, free from contaminants, air voids and heat resistant by dry cured process.The nominal thickness as shown in table 1.Type:N2XSYNA2XSYNominal Voltage:3.6/6 ( 7.2 ) kV6/10 ( 12 ) kV8.7/15 ( 17.5 ) kV12/20 ( 24 ) kV18/30 ( 36 ) kVSpecification:SPLN 43-5(Other Specifications are availible upon request)Table 1. Insulation ThicknessTabel 2 . Minimum Total Cross Section Of Metallic ScreenInsulation ScreenExtruded Semi-conducting compound. Minimum thickness 0.5 mm and the maximum volume resistivity of 5000 ohm-cm at 20°C and 25000 ohm-cm at WC The screen is tightly fitted to insulation to exdude all air voids and can be easily hand stripped on site.Conduction Water Blocking LayerSemi-conductive water blocking tape provided over the insulation screen which will swell up under the influence ofmoisture or water.Metallic ScreenCopper wires applied over the conducting water blocking layer. Minimum cross section of concentric conductor as shown in table 2. Copper tape with minimum thickness 0.1 mm and maximum 0.3mm applied over copper wires.Water Blocking LayerNon-conducting water blocking tape provided the metallic screen which will swellup under ihe influence of moisture or water.Outer SheathExtruded red PVC, suitable tar exposure to sun-light or other local atmospheric environments and for the operating temperature of the cable.

Kabel Voksel AAC 630 mm2 ALL ALUMINIUM CONDUCTORInformasi harga, Diskon, Komisi by WA : simpati12 812 1843 3055 (Fast Response)Types: AAC 630 mm2 

Kabel Voksel N2XSY NA2XSYInfo Harga dan Diskon / komisi, WA : Simpati12 812 1843 3055Ukuran :NA2XSY.  1 x 50 mm2 - 12/20  KvNA2XSY.  1 x 70 mm2 - 12/20 KvNA2XSY. 1 x 95 mm2 - 12/20 KvNA2XSY. 1 x 120 mm2 - 12/20 KvNA2XSY. 1 x 150 mm2 - 12/20 KvNA2XSY. 1 x 185  mm2 - 12/20 KvNA2XSY. 1 x 240  mm2 - 12/20 KvNA2XSY. 1 x 300  mm2 - 12/20 (24) KvNA2XSY. 1 x 400  mm2 - 12/20 (24) KvNA2XSY. 1 x 500  mm2 - 12/20 (24) KvNA2XSY 1 x 630 mm2 -12/20 (24) Kv 1 CORE CABLE TYPE N2XSY, NA2XSYSINGLE CORE CABLECOPPER OR ALUMINIUM CONDUCTOR,XLPE INSULATED,COPPER WIRES SCREENED AND PVC SHEATHEDType N2XSY, NA2XSYFeatureXLPE insulated single core cables are applied for installation indoors, outdoors, underground and cable rack.CONSTRUCTIONConductorStranded compacted circular copper or aluminium conductors. All internal interstices of trie conductor rilled with water blocking compound which is specified to prevent ingress of water through conductor during storage, handling, installation and operating of the cable.Conductor ScreenExtruded Semi-conducting compound. Minimum thickness 0.5 mm and the maximum volume resistivity of 5000 ohm-an at 20° C and 25000 ohm-cm at 90° C.InsulationExtruded XLPE with high degree of cross-linking, free from contaminants, air voids and heat resistant by dry cured process.The nominal thickness as shown in table 1.Type:N2XSYNA2XSYNominal Voltage:3.6/6 ( 7.2 ) kV6/10 ( 12 ) kV8.7/15 ( 17.5 ) kV12/20 ( 24 ) kV18/30 ( 36 ) kVSpecification:SPLN 43-5(Other Specifications are availible upon request)Table 1. Insulation ThicknessTabel 2 . Minimum Total Cross Section Of Metallic ScreenInsulation ScreenExtruded Semi-conducting compound. Minimum thickness 0.5 mm and the maximum volume resistivity of 5000 ohm-cm at 20°C and 25000 ohm-cm at WC The screen is tightly fitted to insulation to exdude all air voids and can be easily hand stripped on site.Conduction Water Blocking LayerSemi-conductive water blocking tape provided over the insulation screen which will swell up under the influence ofmoisture or water.Metallic ScreenCopper wires applied over the conducting water blocking layer. Minimum cross section of concentric conductor as shown in table 2. Copper tape with minimum thickness 0.1 mm and maximum 0.3mm applied over copper wires.Water Blocking LayerNon-conducting water blocking tape provided the metallic screen which will swellup under ihe influence of moisture or water.Outer SheathExtruded red PVC, suitable tar exposure to sun-light or other local atmospheric environments and for the operating temperature of the cable.